1
وصف الطلب
2
معلومات الاتصال

ماذا تحتاج؟

صف المنتج أو الخدمة التي تبحث عنها

معلومات الاتصال

سنتواصل معك في أقرب وقت ممكن

تم إرسال طلبك!

شكرًا لك! سنتواصل معك قريبًا مع أفضل العروض.

إلكترود تأريض أنودي مرن منخفض الذوبان MINADAGS ER-6 EPDKUS

إلكترود تأريض أنودي مرن منخفض الذوبان MINADAGS ER-6 EPDKUS

العلامة التجارية: MINADAGS
$9 - $120 USD
MOQ: 50 meters

الميزات الرئيسية

Working element length, m: 5-600
Nominal outer diameter of the working element on electrically conductive polymer sheath, mm: 21; 36; 50; 90
Cross-section of copper conductor of the operating element and supply cable, mm²: 10; 16; 25; 35; 50.
Type of construction: ER-6

المزيد من MINADAGS

MINADAGS ER-7 Flexible Low-Solubility Anodic Grounding Electrode

أنود مِيناداجس إير-7 للترابط الأرضي

$9-$120
Flexible Low-Soluble Anode Grounding System ER-6

نظام التأريض الأنودي القابل للتمدد ER-6

$9-$60
Extended Flexible Low-Soluble Anode Grounding System ANOD MINADAGS ER-7 RPDUS

نظام تأريض أنود مرن موسع - أنود ميناداجس إير-7 ربدوس

$9-$120

الوصف

Extended flexible low-soluble anode earth electrodes (hereinafter - PA) for application in the system of current-pumping anode earths of installations of cathodic protection of metal structures and constructions against underground corrosion in aqueous media. PAs provide long-term, uninterrupted and efficient flow of protective current from the cathodic protection station through the ground to the protected structure.

PAs are designed for operation in soils with any specific electrical resistance, especially in soils with high specific electrical resistance (more than 100 Ohm-m). In soils with low resistivity (less than 100 Ohm-m), double-layer PAs with current-carrying sheaths are used, as well as combinations of PAs with distributed or concentrated anode earth electrodes.

المواصفات

Working element length, m
5-600
Nominal outer diameter of the working element on electrically conductive polymer sheath, mm
21; 36; 50; 90
Cross-section of copper conductor of the operating element and supply cable, mm²
10; 16; 25; 35; 50.
Type of construction
ER-6
Material of the electrically conductive sheath of the operating element
E - electrically conductive carbon-filled rubber (elastomer)
Conditions of use
P - subsurface anode
Design and method of placement
E - extended, placed in the ground along the protected structure
Presence and type of electrically conductive carbon backfill (activator)
?
Material of the backfill containment shell (only for versions with K, KMA backfill)
- abrasion-resistant, moisture-resistant fabric
PA design
- standard version
Reinforced design of the working element construction
RS - hardened core
Tinning of the copper core of the operating element and the lead cable
- non-tinned core; l - tinned core.
Length of cable outlet at the beginning of the work item, m
any length
Length of cable outlet at the end of the work item, m
any length

منتجات ذات صلة

Anodic Grounding Electrode - AZ

electrode الأرضي الأنودي - AZ

$90-$300 USD
Height: 1650
Material of manufacture: Coxa - 70%, peca - 30%
ش.م غازبروم توزيع الغاز أوفا 🇷🇺
Anode Grounding Electrode ElZhK for Corrosion Protection

الزرع الأنيودي إيل زيد كيه لحماية التآكل

$90-$300 USD
Length: 1500
Material of manufacture: Cast iron CS 15 GOST 7769
ش.م ماغنيت 🇷🇺
MINADAGS ER-7 Flexible Low-Solubility Anodic Grounding Electrode

أنود مِيناداجس إير-7 للترابط الأرضي

$9-$120 USD
Working element length, m: 5...600
Nominal outer diameter of the working element on electrically conductive polymer sheathing: 21; 36; 50; 90 - for sheath "E" - made of rubber. 14,7; 15,8; 17,6; 18,4; 20,1; 18,7; 19,8; 21,6; 22,4; 24,1 - for "P" sheath - of polyolefin.
ش.ذ.م.م دونكابيل 🇷🇺
Low-Soluble Anode Grounding System "Mendeleevets"-MRKP

نظام تأريض أنود منخفض الذوبان "مندليف" -MRKP

$90-$360 USD
Material of manufacture: Chemical resistant material (titanium, niobium, tantalum) with MMO coating
Material of manufacture: Chemical resistant material (titanium, niobium, tantalum) with MMO coating
ش.م.م خيمسيرفيس 🇷🇺
Mendeleevets-MRV Underwater Low-Soluble Anode Grounding System

نظام تأريض الأنود تحت الماء "مندلييفيتس"-MRV

$90-$600 USD
Material of manufacture: Chemical resistant material (titanium, niobium, tantalum) with MMO coating
Material of manufacture: Chemical resistant material (titanium, niobium, tantalum) with MMO coating
ش.م.م خيمسيرفيس 🇷🇺
Ferrosilicon Anode Grounding System AZM-3HK-SUGAZ

نظام تأريض الأنود السيليكون الحديدي AZM-3HK-SUGAZ

$90-$300 USD
Length: 1600
Housing material: HS 15 GOST 7769-82
ش.ذ.م.م نبيف "سبلاف 🇷🇺
Flexible Low-Soluble Anode Grounding System ER-6

نظام التأريض الأنودي القابل للتمدد ER-6

$9-$60 USD
Working element length: 5...600
Cross-section of copper conductor of the operating element and supply cable, mm²: 10, 16, 25, 35, 50
ش.ذ.م.م دونكابيل 🇷🇺
Extended Flexible Low-Soluble Anode Grounding System ANOD MINADAGS ER-7 RPDUS

نظام تأريض أنود مرن موسع - أنود ميناداجس إير-7 ربدوس

$9-$120 USD
Working element length, m: 5-600
Working element length, m: 5-600
ش.ذ.م.م دونكابيل 🇷🇺
Anode Grounding Electrodes for Cathodic Protection Systems TBPSH.685543.027

أقطاب التأريض الأنودية لأنظمة الحماية الكاثودية TBPSH.685543.027

$90-$360 USD
Industrial equipment
Factory direct from Russia
ش.م أنظمة وتقنيات خطوط الأنابيب 🇷🇺
Steam Turbine Diaphragm 30 Stages Model 47T230-3219

غشاء توربين بخاري مكون من 30 مرحلة موديل 47T230-3219

$9,000-$30,000 USD
Overall dimensions (diameter): 2950
Overall dimensions (width): 420
ش.ذ.م.م القابضة تبلوإنيرغوسيرفيس 🇷🇺
Modular Vise PQ160 with Amplifier and Step Jaws Set BB.VS.160.11.002

فكي مودولار PQ160 مع مكبر ومجموعة من الشفاه المتدرجة BB.VS.160.11.002

$150-$420 USD
Jaw width: 160
Workpiece clamping force: 54000
ش.ذ.م.م أرموريكا 🇷🇺
Graphite Electrodes EGSP-UNP Diameter 520 mm and More 650 mm

أقطاب الجرافيت من نوع EGSP-UNP بقطر يصل إلى 520 مم وأكثر من 650 مم

$900-$3,000 USD
Diameter: 710
Length: 1500
ش.ذ.م.م إل 6 🇷🇺
Fountain Armature for Well Sealing (AFK)

أرماتور نافورة (AFK)

$9,000-$60,000 USD
Working pressure: 14...105
Material: alloy steel, corrosion-resistant alloy
ش.م أك كورفيت 🇷🇺
T-60/66-10.2 Steam Turbine - Single-Cylinder Design

توربينة البخار T-60/66-10.2 - تصميم أسطوانة واحدة

$900,000-$3,000,000 USD
Rated power: 66
Maximum heat load: 143
ش.م أورال 🇷🇺
Carbon Electrodes for Ferroalloy Production, Packaged, Size 762x914x3556

أقطاب كربونية لإنتاج الفيروأليوي - عبوة بحجم 762x914x3556

$90-$300 USD
Thermal conductivity, W/m*K: 80
Thermal conductivity, W/m*K: 80
ش.ذ.م.م إل 6 🇷🇺
Spot Welding Machine for Low Carbon Steel MT-801 UHL4

آلة لحام النقاط للصلب منخفض الكربون MT-801 UHL4

$900-$3,000 USD
Power: 60
Rated welding current: 8500
ش.م مصنع "فيرما سيلما 🇷🇺
Steam Turbine P-50-12.8/0.8

توربين بخاري P-50-12.8/0.8

$90,000-$360,000 USD
Fresh steam consumption: 330
Fresh steam pressure: 12.8
ش.م أورال 🇷🇺
Polishing Motor POLIR 6.4 OPTIMUM

آلة تلميع بولير 6.4 أوبتيموم

$900-$3,000 USD
Weight: 14
Power supply (without external hood): 220/230
ش.ذ.م.م فيغا - برو 🇷🇺
Carbon Mono-Electrodes 1205 mm for Ferrothermal Furnaces MUV-C

الأقطاب الكهربائية الكربونية أحادية 1205 ملم للاستخدام في الأفران الحرارية MUV-C

$900-$3,000 USD
Diameter: 1205
Ash content: 2.5
ش.ذ.م.م إل 6 🇷🇺
Stator Section Kit for Electric Motor A-114-4 (320kW, 6000V, 1480 RPM) RESIN Technology

مجموعة أقسام القلب الثابت للمحرك الكهربائي A-114-4 (قوة 320 كيلو واط، جهد 6000 فولت، سرعة 1480 دورة في الدقيقة)

$900-$3,600 USD
Section length: 900
Section width: 319
ش.ذ.م.م رإم إند كويل 🇷🇺
طلب عبر واتساب