Pin diameter
9 mm, 10 mm, 11 mm, 12 mm
Pin length
320 mm, 340 mm, 360 mm, 380 mm, 400 mm, 420 mm
Anatomical curve
6 degrees
Shape of the distal end of the pin
conical
Distally from the distal end of the pin there is 1 hole at a distance of
60 mm
Hole shape without corner stability
Oval
Diameter of the proximal part of the pin
16 mm
Diameter of the thrust plate at the top
13.5 mm.
Thrust plate with anti-rotation chamfer
Compliance
Width of anti-rotation chamfer
5.0 mm
Length of anti-rotation chamfer
8,0 mm
From the edge of the proximal part, in a medial-lateral direction, there is a single drop-shaped orifice, at a distance of
40.0 mm
Width of opening at 125 degree angle
11,0 mm
In the center of the pin is a hole with a diameter of
4.5 mm.
In the proximal part, the hole is threaded for a plug and is widened
Up to 8.0 mm
Length of swivel screw
From 70.0 mm to 120.0 mm, in 5 mm increments.
The helicoidal screw consists of three interconnected parts
Compliance
There is a hole in the center of the screw, diameter
3.0 mm
There is no thread on the outer surface of the sleeve for fixing on the pin
Compliance
Number of blades on the blade
4
The blade rotates freely when untwisted
Compliance
Length of the screw (plug) that is inserted proximally
40.0 mm
Screw (plug) has a blunt tip, two-stage
Compliance
It is possible to use a key of the size
10.0 mm
Threads on the screw are low, sparse, with pitch
4.0 mm
The tip is triangular, blunt
Compliance
Screw length
From 26.0 mm to 100.0 mm