مستشعر سرعة الاهتزاز للمعدات الصناعية - 2A205HA-XX (T)

مستشعر سرعة الاهتزاز 2A205HA-XX (T) لمراقبة المعدات الصناعية

الشركة المصنعة:ش.ذ.م.م جي تي لاب
السعر:طلب عرض سعر

أسعار الجملة متاحة

شروط FOB و CIF و EXW متاحة

الوصف

هذا vibration measurement equipment مصنوع في روسيا ومتاح للاستيراد إلى الأسواق العالمية. المنتجات الروسية معروفة بمتانتها وموثوقيتها ونسبة السعر إلى الأداء الممتازة.

للحصول على مواصفات المنتج التفصيلية، يرجى الاطلاع على علامة تبويب المواصفات. اتصل بفريقنا لطلب معلومات الأسعار والتوافر والشحن.

المواصفات

Vibration velocity to current signal conversion factor 4 ... 20 mA, (± 10 %)
1.6 mA?s/mm | 0.8 mA?s/mm | 0.4 mA?s/mm | 0.2 mA?s/mm | 0.1 mA?s/mm | 0.08 mA?s/mm
Measured vibration velocity range, RMS
10 mm/s | 20 mm/s | 40 mm/s | 80 mm/s | 160 mm/s | 200 mm/s
Unevenness of frequency response relative to the value at the base frequency 159.15 Hz, within the limits of
3 to minus 12.5%
Relative transverse conversion ratio
< 5 %
Coefficient of influence of ambient air temperature, within the limits of
± 0,2 %/°?
Sensor supply voltage
+ (10 ... 24) ?
Time to establish operating mode
< 4 ?
Housing material
stainless steel
Explosion protection
1Ex d IIC T6...T4 Gb | 0Ex ia IIC T6...T4 Ga
Degree of protection against external influences
P67
Weight (without cable)
330 ?
Type of product according to PP RF 616
Instruments and other instruments for measurement, control and testing
Operating temperature range: standard | (T)
-40...125 °C
Operating frequency range of measured vibration velocity
10...1000

ملاحظة: جميع المواصفات مقدمة من الشركة المصنعة وقد تخضع للتغيير. يرجى الاتصال بنا لتأكيد أحدث المواصفات قبل تقديم طلبك.

وفر وقتك

شارك متطلباتك للحصول على رد سريع!