3D Root Canal Filling System with Heated Gutta-Percha - Estus Pack-Fill

Brand: Estus

$1,500 - $4,200 USD

MOQ: 2 sets

Key Features

Power supply for handpieces: Li-Ro battery pack (2x3.7V; 800mAh) with charging station charging

Operating temperature in modes: - cutting of gutta-percha "CUT" - 170 +/- 10 degrees centigrade; - condensation of gutta-percha "PACK" - 120 +/- 10 degrees centigrade; - thermal activation of irrigant "MIX" - 50 +/- 5 degrees centigrade.

Accuracy of stabilisation of Estus Pack operating temperature: 2 million m³

Maximum duration of the thermoplugger heating cycle with subsequent automatic shutdown in modes: - gutta-percha cutting "CUT" - 10 sec. - condensation of gutta-percha "PACK" - 20 sec - thermal activation of irrigant "MIX" - 120 sec.

Supplier Information

GEOSOFT DENT OJSC

🇷🇺 📦 🏭 🛡️

View All Products

Quick Inquiry

Description

The Estus Pack-Fill system is designed for three-dimensional obturation of root canals with heated gutta-percha at the stages of obturation "DownPack" and "BackFill" and consists of 2 tips: 1. Estus Pack handpiece, designed for heating, vertical condensation of gutta-percha and cutting of gutta-percha pins in the root canal of the tooth at the stage of obturation "DownPack" and thermal activation of irrigation solutions. 2.

Estus Fill" tip, designed for heating and subsequent injection of gutta-percha into the root canal of the tooth using an injector needle at the stage of obturation "BackFill". Features and advantages: Pack: -Max. operating temperature 170 degrees C (heating not > 3 sec); -3 sizes and 6 positions of the plugger; -Vibration function.

Fill: -Works with gutta-percha posts; 2 modes and 3 gutta-percha feeding speeds. For Pack and Fill: -Control with a ring button; -Removable battery pack (8V); -Work both independently and as part of the Dental Complex.

Specifications

Power supply for handpieces

Li-Ro battery pack (2x3.7V; 800mAh) with charging station charging

Operating temperature in modes

- cutting of gutta-percha "CUT" - 170 +/- 10 degrees centigrade; - condensation of gutta-percha "PACK" - 120 +/- 10 degrees centigrade; - thermal activation of irrigant "MIX" - 50 +/- 5 degrees centigrade.

Accuracy of stabilisation of Estus Pack operating temperature

2 million m³

Maximum duration of the thermoplugger heating cycle with subsequent automatic shutdown in modes

- gutta-percha cutting "CUT" - 10 sec. - condensation of gutta-percha "PACK" - 20 sec - thermal activation of irrigant "MIX" - 120 sec.

Estus Pack tip runtime with a new fully charged battery pack without recharging.

Not less than 500 heating cycles

Operating temperature of Estus Fill tip

180 million m³

Accuracy of operating temperature stabilisation in Estus Fill

10 million m³

Time of maintaining the operating temperature in Estus Fill in "standby" mode

Estus Fill operating time with a new fully charged battery pack without recharging.

13-15 heating cycles of 3 min each

Time of operation of handpieces in the "standby" mode before automatic power failure

Overall dimensions of the Estus Pack nozzle

(207*33*43) ±3 mm

Weight of Estus Pack tip

80 million m² total area

Overall dimensions of Estus Fill tip

(240*33*43) ±3 mm

Weight of Estus Fill tip

115 million m² total area

Protection against electric shock for lugs

Product with internal power supply. Type B working part

Built-in NF-03 radio module in the tips

2.4-2.525 GHz, max. output power - +7 dBm, range - up to 3 m in line of sight

Overall dimensions of "Estus Energy-D" charging station

(87*56*49) ±3 mm

Weight of Estus Energy-D charging station

145 million m² total area

Parameters of the charging station power supply unit

Input voltage (100-240) V, ~50/60Hz, Output voltage 5V; max. 2,4?.

Overall dimensions of the Estus Two-B stand

(102*100*40) ±3 mm

Weight of "Estus Two-B" stand

One link up to 16GB 64-bit DDR4-2400 MHz with ECC support; 16GB (for CPC1309-01); 8GB (for CPC1309-02) million m² total area

Adjustment of the working temperature of the Estus Pack handpiece in "PACK" mode in conjunction with the ESTUS MULTI control uni

80...120 million m³

Adjustment of the Estus Fill handpiece operating temperature in conjunction with the ESTUS MULTI control unit.

160...200 million m³

Max. time for full charging of handpiece battery packs

3 kcal/h

Max. injection needle tip temperature

75 million m³

Max. temperature of the external surface of the heater Estus Fill

45 million m³

Average time to heat Estus Fill from 20 deg. C to 180 deg. ?

15 -

Max. time to heat the thermoplugger to the set operating temperature

3 -

Time of extrusion of whole gutta-percha rod in Estus Fill with accuracy +/- 10 sec.

- for speed level "High" - 30 sec; - for speed level "Middle" - 65 sec; - for speed level "Low" - 140 sec.

What do you need?

Your Contact Information

Request Submitted!

Furniture

Electrical & Lighting

Transport & Special Vehicles

Industrial Equipment

Medical & Healthcare

Safety & Security

Auto Parts & Accessories

IT & Telecommunications

Toys & Children Products

Agriculture Equipment

Textiles & Fabrics

Construction & Building

HVAC & Refrigeration

Home Appliances

Sports & Seasonal

3D Root Canal Filling System with Heated Gutta-Percha - Estus Pack-Fill

Key Features

More from Estus

Endodontic System for Root Canal Preparation and Cleaning - Estus Pump

Endodontic System for Root Canal Preparation and Cleaning - Estus Smart-B Apex Locator

Estus Dental Complex for Dental Procedures GE43E-ESTUS

Endodontic System for Root Canal Preparation and Cleaning Estus Drive (Codes GE29-DG-R, GE29-DG-0)

Three-Dimensional Root Canal Filling System with Heated Gutta-Percha - Estus Pack-Fill

Endodontic System for Root Canal Preparation and Cleaning "Estus Drive" (GE29-DRAS-R, GE29-DRAS)

Endodontic System for Root Canal Preparation and Cleaning "Estus Drive" (GE29-DR-P, GE29-DRA-P)

Apex Localization Device Estus Apex TU9452-005-56755207-2016

Wireless Endodontic System for Root Canal Preparation and Cleaning - Estus USB

Estus Pulp Dental Pulp Electrodiagnosis Device (GE33-RP, GE33-R0, GE33-R4)

Dental Photoinitiator for Composite Curing - Estus Light with BLUE Tip