AK-74 Magazine Bag for 4 Magazines (6Sh46) - Designed for 6P20 Applications

The product consists of a front wall, a back wall, two partitions, a pocket for oiler. On the front wall of the bag from the left side at a distance of 120 mm from the upper edge is a pocket for oil can, closed with a leather flap measuring 90x65 mm. The flap is sewn to the upper edge of the front wall and closes the oiler pocket with a 12mm diameter leather washer.

On the upper edge of the front wall from the centre on the right at a distance of 45 mm there is a lock F-03 with a leather washer. The lower part of the front wall is reinforced with a stiffener (bottom of the bag). Inside the bag there are two partitions (left and right, which are attached to each other).

The left partition is attached to the front wall in two places (on the side and in the middle), and the right partition is attached to the side of the front wall and the middle of the back wall. At the top of the septum is a leather gorte with two slits, 110 mm long. A loop of binder tape is sewn on both sides of the gort.

On the wrong side of the front wall, on the right side is sewn pocket for shompolov...