Control and Measurement Point Type 1 KIP.PTM for Pipeline Monitoring and Regulation

The control and measuring point type 1 KIP.PTM is intended for marking of pipeline routes and for control and regulation of electrochemical protection parameters operated in conditions of temperate climate (U), cold climate (CL), temperate and cold climate (UHL) in accordance with GOST 15150. Type 1 KIP.PTM is a three-sided stand with a side 180 mm, made of impact-resistant polymer composite that provides high resistance to fracture at a load of at least 5.0 kN (500 kgf), light resistance, frost resistance and does not support combustion.