Customized Sliding Wardrobe ATT-KP1 for Personalized Storage Solutions

This product is made to order depending on the needs of the customer The lid of the cabinet and fronts: should be made of MDF 25mm thick shaped and fronts 16mm, On the outer sides of the three-layer enamel coating with anti-vandal special effect colour NSC gloss not more than 10% (matte finish). The enamel must meet the following characteristics according to GOST 54586-2011 The frame must be made of 16mm thick E1 emission class chipboard and 25mm thick shelves. The ends of the cabinet body shall be covered with 2mm thick PVC edging.

The rear wall shall be made of white coloured CCDF. The cabinet shall stand on a plinth and have adjustable supports. The right and middle sections shall be for outerwear and hats The left section of the wardrobe shall have a rod for short clothes and three shelves for shoes.

The wardrobe is equipped with three sliding fronts (sashes). The mechanism for the sliding fronts (sashes) shall be supportable and shall consist of an upper guide and a lower guide.