Flash A50 Double Bed for Comfortable Sleep and Elegant Design

Bed A50 of panel construction. The width of the mattress is 1600 mm. The body of the bed is formed by the headboard and footboard, connected by longitudinal tails.

The centre longitudinal support is fixed in the middle of the bed. Coniferous lumber bars are fixed on the support and the king posts: on the support - on both sides, on the king posts - on the inner side. A flexible base is laid on the bars, which is a bent-glued laminated plate made of husked veneer.

The bent-laminated plates with plastic tips at the ends are fastened along the length of the bed with fabric tape using metal staples. The body of the bed is assembled on metal corners with screws and euro screws. Longitudinal bars made of softwood lumber are fastened to the longitudinal bars and the centre support with screws and glue.

The headboard is made of two parts: support and decorative overlays assembled on laminated board uprights with screws and screws. The height of the headboard and the volume of the under-bed space allow for the installation of drawers that can be pulled out.