Laboratory Table with Cabinet Type 1 High 2 for Laboratory Use

Size 1500x600x900mm. Rack 874x568mm.Has C-shape, the upper horizontal part is made of cold-rolled pipe 30x30x1,5mm.The lower horizontal part is made of cold-rolled pipe 60x30x1,5mm.The vertical part consists of two cold-rolled pipes 30x30x1,5mm and a box.The box is bent from cold-rolled sheet metal 0.7mm thick with overall dimensions 765x145mm with a border on the pyrimetre 15mm.The rack (sidewall) is welded, but without visible weld seams.All visible end holes of profile pipes are closed with plastic plugs.The frame is 1436x540mm.The frame is made of cold-rolled profile pipe with cross-section 30x30x1,5mm.The box is bent from cold-rolled sheet metal 0,7mm thick and has dimensions 1376x480mm and perimeter edge 15mm. The frame is 393x1436mm.

It has a rectangular shape. It is made of cold-rolled profile pipe with a cross-section of 30x30x1.5mm. Table top LDFP 22mm.

Curvilinear detail. Covered with plastic underneath and on top. Hanging cabinet 400x538x476 LDFP 16mm.