Pupil's table FrPU 4.1.5-7

The frame of the table has a welded construction of 2 supports consisting of a 45x25mm thick 1.5mm flat-oval tube and 2 crossbeams made of 30x15mm thick 1.5mm flat-oval tube. And has two bent adjustable lower support legs made of 40x20mm flat-oval tube 1.5mm thick. The 45x25mm tube has four holes and is fitted with a plastic transition tube for rigidity when fixing the tube in the tube.

A support angle plate is welded to the bottom of the table leg on the outside of the bend to further secure the plastic support. A wide plate with ears is welded to each upper support. The lugs have round through holes for fixing the cover.

2 hooks. All visible holes in the pipe are covered with plastic plugs. The frame is painted with powder paint.

The table cover is made of polypropylene. The cover has stiffening ribs at the bottom. LDPE 16mm.