Student Desk AGAT 01.03.01.01 for Classroom and Study Use

Dimensions m/k 590x500x738. Made of 45x25x1.5mm flat-oval tube and 22mm diameter round tube, 1.5mm and 1.0mm thick sheet. The frame consists of the upper part, which has a mechanism for tilting the table top, and the lower part.

The support consists of two 45x25x1.5 flat-oval tubes welded together on the flat side. The pipes have bends in the upper and lower parts. The welded pipes of the support form an L-shape.

In the upper part there is a U-shaped profile for the table top, fastening via a m6x16 screw. One profile in the form of a "crab" is welded to the flat-oval tubes at the end, the second counter profile is attached to the table top profile using m6x45 screws. The lower part of the leg is fitted with wheel supports with a stopper.

The left and right legs of the frame are connected by a crossbeam using m8x60 screws. The crossbeam is made of a round tube with a diameter of 22 mm and welded on both sides of the brackets, repeating the contour of the flat-oval tube of the support, providing a tight, secure fit. Pulpit made of LDFB.Table top LDFB 22mm.