Teacher's Desk AGAT 01.01.01.02 for Classroom Use

Size 1500x650x750 mm. The frame is made of cold-rolled sheet with thickness of 1.5 mm and 1.0 mm. The frame consists of all-welded supports and tsarga.The support rack is made in the form of a box with six bends, having a trapezoid at the base, has on the front side 11 oval holes in the form of perforation.

The support is closed with a U-shaped cap over the entire height. The bottom of the support consists of two parts made of 1.5 mm sheet: 1) U-shaped profile with two 13.5 mm diameter holes The base of the profile is 64 mm, height 50 mm. 2) profile cover with a width of 70mm, with special grooves for installation of the rack-column in it.

The profile and the cover are welded together to form a box. The whole welded structure of the rack is inserted through the grooves into the lower part of the support (base) and is welded from the inside without visible welds. The headboard is made of bent sheet 1.0mm in the form of a tray with oval holes in the form of perforations.

The size of the headboard is 1330x400x20.The table top is made of LDFP 22 mm. Visible ends are lined with 2mm PVC edgebanding.