Laboratory Cabinet with E1 Emission Class LDSP for Safe Storage

Cabinet is made of 16mm and 22mm thick LDF of E1 emission class with wood grain. All product elements are lined with 2mm impact resistant. Postformed 22mm is installed at a height of 900mm from the floor, lined with chemical moisture resistant plastic.

The height of the extraction chamber is 1100mm. In the lid of the 22mm thick cabinet there is a ø100mm hole for a standard duct for installation of exhaust ventilation. The cabinet is equipped with a mono-mixer, a mini-sink and a corrugated pipe for draining solutions.

The upper façade is made of 4mm thick organic glass. One of the transparent fronts is divided into two parts. The lower façade part goes behind the other one on vertical rails, fixed at a given height, providing an opening of 785x450mm.

On the same side, the cabinet has two tabbed doors for access to the sanitary ware. Only high-quality components of foreign manufacturers are used in the assembly.